Wulftec SMHPA-300
The SMHPA-300 model, a standard base high-profile turntable as the ideal stretch wrapping solution for your unique needs!
Description
Key Specs:
Production Rate
- 55 loads per hour
Machine Dimensions
- 120 ” L x
- 51 ” W x
- 96 ” H
Maximum Load Size
- 51 ” L x
- 51 ” W x
- 80 ” H
Load Weight
- 8000 lbs
Approximate Shipping Weight
- 1400 lbs
Electrical Requirements
- 120 V /
- 1 ph /
- 60 Hz
- 15 A
Pneumatic Requirements
- 3 cfm @
- 80 psi
Controls
- Allen Bradley MicroLogix 1200 PLC
- 24V control system
- Current overload protection
- NEMA 4/12 control cabinet
- Autoheight sensing photoeye
- Power on/off switch and status light
- Start/stop push button
- Large emergency stop (push / pull type)
- Manual carriage up/down function
- Variable table speed (16 RPM) with automatic home position
- Separate up/down carriage speeds adjustment
- Separate top and bottom wrap selectors (0-9)
- Reinforced wrap/manual rotation control
- Film tension adjustment
- Top cover pause switch (Splash proof program)
- Mode switch (Manual or Automatic)
- Pull cord with 40′ of cable (to be installed by customer)
- Separate station on front of tower with clamp jog and an additional e-stop
- Lack of film alarm
Structure
- 14 gauge formed steel tower
- Forklift Portable base design
- Heavy duty structural steel construction
Film Delivery System
- 20″ NO-THREAD® Powered Pre-Stretch Carriage
- 1 HP AC motor with Allen Bradley variable frequency drive
- Lifetime warranty on pre-stretch rollers blue compound
- Film force release for easy pull at start and end of cycle
- 50-400% pre-stretch ratio (preset to customer spec, Std 200%)
- Electronic film tension control with analog sensor
- Film roping bar
- Lexan roller cover for operator safety
- Proximity sensor on carriage gate to ensure gate is properly closed
Film Tail Treatment
- Automated Cut/Clamp & Wipe system
- Pulse controlled cutter
- Film alignment arm & Brush on film tail treatment
Film Carriage Drive
- 1 HP AC motor with Allen Bradley variable frequency drive
- Two #50 carriage lifting chains enclosed in tower for safety
- Bearing supported maintenance free guide wheels
Turntable
- 51″ x 51″ octagonal table 3/8″ thick
- 13 3/8″ table height
Turntable Drive
- 1 1/2 HP AC motor with Allen Bradley variable frequency drive
- 0-16 RPM variable speed (8000 lbs = 12 RPM, 6000 lbs and less = 16 RPM)
- Ring gear with pinion gear drive
- Electronic soft start/stop
- Positive turntable alignment controlled by proximity sensor
Technical Information
- The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide & Installation instructions
Reviews
There are no reviews yet.